H-CLIP CRIMPING MACHINE- H-CLIP CRIMPING MACHINE- H-CLIP CRIMPING MACHINE

The tube crimping machine has been designed to join the ends of a cylindrical & conical tube by a “H” hook or H clip. Using this type of crimping ensures a smooth edge around the crimped section. Thus preventing any media damage to pleated pack. Unlike spot welded end joints, the hook or clip does not corrode. A hook or clip does not corrode like a spot-welded joint. As a result, the pleated pack is not damaged. As opposed to spot-welded end joints, the hook or clip does not corrode.
Fits tubes with a length of up to 900mm
Diameter: 150mm to 650mm
Up to 1mm thick expanded sheet
Upper crimping tool length is 60 mm
Crushing force: maximum one ton (adjustable)
Lower arm length (throat depth) : 900mm
Programmable auto cycle for the foot pedal (option)
For 36-inch-long liners, lower arm support minimizes flexing
Crimping tool that check here supports roller bearings
30 liters of tank capacity
Dimensions of the cylinder: 50x100mm stroke
Diameter of lower arm: 125mm
The lower arm and the crimping tool are hardened to 50 HRC
There is an adjustable support below the lower arm to support the filter.